Details
Specifications
SKU | ATABPP |
---|---|
UPC | 845584057350 |
Brand | Bones Bearings |
Bones Bearings bearing tool. It acts as both a bearing press and a puller. It works with 8mm bearings and for the 90% of people not using spacers in their wheels. It is designed to press the bearings putting only force on the inner race and not the shield. Ball detent technology and small enough to fit in your pocket and make it your keychain.
How to Install Bearings Into Your Skateboard Wheels
Reviews
Customer Reviews
10 Item(s)
per page
- If you have nice bearings, treat them that way Review by Chris
Great tool for switching, pressing or servicing bearings. And really, if you spend the money on nice bearings, you shouldn't be whacking them with a nail punch or screwdriver. Would say this is smaller than I first guessed it would be. (Posted on 8/10/2022)Rating - Just What I Needed Review by Kada
It just arrived an hour ago and it works perfectly! It requires enough force to ensure the bearing won't fall out and be lost forever but not enough to be impossible or irritating, 10/10, will be recommending to a friend. (Posted on 12/29/2021)Rating - Great tool Review by Andrew
Never thought I would need this, always just used tool I had around house. Now I wouldn't change bearings without it. 5stars (Posted on 8/26/2021)Rating - Bearing tool Review by Tamer
It’s never been easy to remove or inset bearings but this tool makes heaps easy. Highly recommended top class product. (Posted on 8/6/2019)Rating - Good tool Review by Eric Mercovich
Well made tool that does its job. (Posted on 7/13/2019)Rating - 5 stars Review by CJ
The quality that you expect. How can anyone make it without one of these? Makes bearing installation and removal effortless. (Posted on 10/29/2018)Rating - Super handy Review by Alex
Makes pulling bearings out of park wheels so much easier. I feel like a fool for using the screwdriver part of a skate tool to slowly pry them out for so long and cramping up my wimpy little hands. Bought this on an impulse while drunk and for 15 bucks it is a legitimately great addition to my skate box. I'm also pretty bad about bending dust shields when putting bearings back in, but this is a really good tool for pushing them in because it only puts pressure on the inner ring. 10/10 would buy while sober as well (Posted on 9/18/2018)Rating - Pretty handy Review by Gregory
I finally broke down and ordered this because of my Bones Race Reds, i find it easier to disassemble with this tool. But, the nice surprise to me, is that i find myself using it to cram bearings into wheels more than i thought i would. Normally i use the truck axle... but this is pretty handy for setting up a new set of wheels with bearings. (Posted on 4/10/2018)Rating - Great tool Review by Ana
It makes it very easy to change the bearings to clean or change the wheels. (Posted on 12/9/2017)Rating - No Brainer Review by Scott
Takes the stress out of pulling bearings. This plus a cleaning kit and speed cream makes for happy skating. (Posted on 10/11/2017)Rating
10 Item(s)
per page