Customer Reviews

I just built Review by nathaniel “zane”

Rating

I just built the ultimate skateboards sort of. I have Tensors Rictas PlanB prolite Mob and Bones Swiss 6 and they're so fast my friend tried to push off and twisted his ankle. (Posted on 12/30/2013)

So I buy a Review by randy

Rating

So I buy a set of Bones Super Swiss 6's and they changed the way I skate. My skate got jacked on a trip I took i rebuilt and the shop owner sells me a set of oust bearings saying he refuses to sell Bones and I've never been so let down by a set of bearings, so I bought a set of REDS to tide me over till I got a set of silicon ceramics...which just arrived. i figured I'd write this before I get on my stick and go for a push. Thank you to the Bones Brigade for making my skate just that much more amazing. (Posted on 12/30/2013)

Crud, Super Swiss Review by Jeremy “Drifter” Doan

Rating

Crud, Super Swiss 6 Bearings are the best ones out there. Theres nothing more like it, the feel of going down a hill hitting 40 MPH, with the SS Bearings propelling you. :) (Posted on 12/30/2013)

I got the Super Review by Kevin Alano

Rating

I got the Super Swiss 6 and they're fast as hell! I've been getting a lot of speed down ramps and downhills! Bones Bearings is and will always be the best bearings out there! (Posted on 12/30/2013)

I currently use Review by Sandy “Emerling”

Rating

I currently use the 6 ball bones, and have been using bones bearings for 10 to 15 years now. I think they are the best bearing available, obviously really like them. Why don't you (or are you going to), make them with ceramic bearings like the standard 7 ball? THANKS (Posted on 12/30/2013)

I bought a Review by Nick Klinkers

Rating

I bought a set of the Super Swiss Six with my long board over four years ago! and i have used other bearings since then in my board which did not last. they lasted maybe two months before they were done. I would clean those bearings every week trying desperately to have them perform the same as the Super Six's and needless to say I failed miserably! I will NEVER use another brand of bearing again. Bones are the best bearings on the market. (Posted on 12/30/2013)

I've been riding Review by Joey

Rating

I've been riding on some sort of bearings since I was two. When I was about 8 my older brother had a sponsorship with you guys in which he rode Swiss but gave me the REDS. I started longboarding about 5 years ago and have only bought Swiss 6 for my boards and I still ride my original bearings sometimes they are still butter smooth and I only clean my everyday wheels once every 2-4 months. All of my boards have been 30 mph and up and there's never a sweat of them welding together or falling apart when I start sliding at high speeds Needless to say I doubt I will ever ride abec rated bearings again and if I do it is only cause I'm not riding one of my boards. Thank you Bones you guys are the best. (Posted on 12/30/2013)

I started skating Review by ilir

Rating

I started skating in 86 or so... I've been skating Bones Bearings for 7 or 8 years now (Swiss & 6 balls), and they're the best, no doubt. Today, I bought my first set of Ceramics! I'm really hyped and it's really an honor for me to ride them... I just love the sticker too. Thank you for delivering the quality and precision material our activity requires. (Posted on 12/30/2013)

Super Swiss 6 Review by mike “kentuckyskater”

Rating

Super Swiss 6 are super sweet. I did not know if what I read about them were true or overrated. They are in fact very amazing. They are almost too fast to the point where they are DANGEROUS so only get them if you want danger. (Posted on 12/30/2013)

I've always longboarded Review by ian “malango” cassinera

Rating

I've always longboarded with cheaper bearings with the expectation of changing them out after every run, then I heard about Bones Super Swiss 6 that pretty much last forever as long as you take care of them. 6 months later and 84 runs and they still are as smooth as the day I got them. (Posted on 12/30/2013)