Bones® REDS® Skateboard Bearings 8 pack

Bones® REDS® Skateboard Bearings 8 pack

Click on images to view full size Zoom In

Bones® REDS® Skateboard Bearings 8 pack

Availability: In stock




BrandBones Bearings


Bones® REDS® are manufactured in China to our Bones Skate Rated™ specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones Swiss performance at a fraction of the cost, they have become the best selling bearings.


  • Single, non-contact, removable rubber shield for easy cleaning and less friction
  • High speed Nylon™ ball retainer for greater strength and speed
  • Pre-lubricated with Speed Cream™ racing lubricant
  • Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible


  • Instructions
  • Sticker

How to Install Bearings Into Your Skateboard Wheels


Customer Reviews

Items 331 to 339 of 339 total

per page
I ride Reds Review by Jake “The Jackal” Shafer
I ride Reds, my wife rides Reds, my stepson rides Reds...I sell Reds more than any other bearings at my Vertigo Skateshops, point made. (Posted on 12/30/2013)
I just want Review by Nick Stotts
I just want to start off by saying that i love your products. i recently purchased some bones reds and i absolutely loved them! I was wondering if u could send me a few stickers for my board and my helmet i would be very grateful! Charlotte, NC. KEEP UP THE GOOD WORK!!!!!!!!!!!!!!!!!!! (Posted on 12/30/2013)
I felt my reds Review by Tyler
I felt my reds start to slow down after just over a year (lots of sand and salt still on the roads up here in the northeast left from winter). After replacing them with another set of reds, my friend's bearings went up on her, so I gave her my cleaned old set of reds that I had lying around. She came back from her test ride raving about how much faster they are than her old bearings ever were. So my old used reds beat out some other brand whom I will not mention here. Keep up the good work. Super Swiss Six are next on my list. I'm sure I won't be disappointed. (Posted on 12/30/2013)
i love these Review by nate “steez mcgee” martin
i love these bearings for 18 bucks mine have lasted me like 2 years and they still ride like brand new (Posted on 12/30/2013)
best, I have Review by simon “simontjeeuuh” depaemelaere
best, I have two months my bones redz bearings and I must say they are very good! I've never had other bearings! I have bones redz offered to all my friends and have already bought four bones redz! (Posted on 12/30/2013)
I have been Review by Kalyb “Kalyb” Goodnight
I have been using a set of bones red bearings for a year and a half now. They have been heavily used in rain, mud, hail, and snow in the next couple of months. I just wanted to say thank you for not failing when I need my board the most traveling from California to Oregon. I saw that I could buy stickers by sending $2. Buy is there any way I could buy a couple vinyl posters? Thanks again

-Kalyb (Posted on 12/30/2013)
I ride Bone Review by Edwin “Sed” Tse
I ride Bones REDS and it's probably the best stuff I've rode. (Posted on 12/30/2013)
Bought some Review by Garrett “Garrett” Riley
Bought some bones red and gave them to a friend. His board is now much faster than mine... Thanks bones... :P (Posted on 12/30/2013)
Wow Review by Mike
By far the best bearing under $20 you can buy. Just clean them once in a while and they'll last you. (Posted on 10/7/2013)

Items 331 to 339 of 339 total

per page

Write Your Own Review

You're reviewing: Bones® REDS® Skateboard Bearings 8 pack

How do you rate this product? *